Rear disc brake conversion <-- New

[HoleShot03]

This might have already been posted but has anyone used this kit from LC?

http://www.toyotacatalog.net/M1WebGear/ ... 515006FA49

[truck action]

Same as another long time kit,GM rotors with the pilot hole enlarged!

[BIGRUFF]

I found the site for sky-brake

http://www.sky-manufacturing.com

got my brackets today only 80.00 bucks
Cant wait to get this swap done
I have an extra set of mustang SVO rotors if anyone needs a set

THE ROTORS ARE FOR THIS CONVERSION CORRECT? HOW MUCH SHIPPED TO PHOENIX,AZ 85037?

IF I GET THE 1" BORE NON ABS MASTER CYLINDER FOR A 4RUNNER/PICKUP THAT USES ALL DISC I WONT NEED THE PROPORTIONING VALVE ALSO RIGHT?

[sitnlow4life]

yes they are they are the rotors in the picture I just used them to mock everything up
My drilled and slotted rotors will be here tommorow
They cost me 80 for the pair
I will get you a price on shipping tommorow
you need calipers?
I can get them from my work for dirt cheap

[BIGRUFF]

yes they are they are the rotors in the picture I just used them to mock everything up
My drilled and slotted rotors will be here tommorow
They cost me 80 for the pair
I will get you a price on shipping tommorow
you need calipers?
I can get them from my work for dirt cheap

yes i need calipers also. if you can get a price of both calipers and rotors shipped to phoenix az 85037. i would appreciatte it

[dragn20s]

yes they are they are the rotors in the picture I just used them to mock everything up
My drilled and slotted rotors will be here tommorow
They cost me 80 for the pair
I will get you a price on shipping tommorow
you need calipers?
I can get them from my work for dirt cheap

sorry just want to get this right please tell me what cailiper you are usein i thank you are usein the mustang rotor 84 -86 svo i going to get the brakets you got for 80.00 just need to know what cailiper you went with and what year it is...??? thanks wayne ......you can also text this to my cell 910 331 7886 ....thanks again!!!!

[truck action]

Those brackets have a offset for GM rotors( the deck height), & will not work with the Mustang rotors which have a different deck height!
I made my own brackets in use with the Mustang rotors & I am using calipers from a 79-85 Caddy with e-brake. I got these from E-Bay/classicperform.com, new $136.53 ,shipped.
I talked with the tech guy @ skybrake about them getting brackets for the Mustang rotors ,but he said they outsource them!
The rotors are .95'' thick,2.56'' high & 11.32'' OD
$115.56 shipped from brakeplanet.com

[dragn20s]

i so lost i need someone to tell me what to order and where please i have a 94 yota rear end help i thank i just need 3 parts brakets calipers and rotor right....help please...i really want to do this thanks wayne

[truck action]

YES, what ever rotors you use ,you have to use calipers that are for the rotor thickness, then you have to make sure the caliper is centered over the rotor! If not you'll have drag,fiction & bad wear,& brakes that pull!
The bracket has to let the caliper sit @ center of the rotor!
I couldn't find any company with brackets for the Mustang rotors ( the offset ) needed!
All kits are for GM rotors for our trucks ,in less you go with Wlwood,( Revolution Brake)then you better have a lot of $$$$$$!